COUNT LAB SOFTWARE | 165.630
Suitable to determine the count of slivers, rovings and yarns, as well as the fabric weight per m².
COUNT LAB SOFTWARE acquires data from the balance (not included, to be selected), converts them into a count figure, and elaborates a report of the statistical values. The report, shown on the PC monitor, can be printed and/or saved.
Recommended solution in case data storage is required.
Statistical data:
- average,
- min and max count,
- standard deviation (sigma),
- CV%, Range %,
- IC% (95%),
- upper and lower limits.
Sample length or area settable for the different measuring systems, from min 0,01 up to max. 999,99 (m, inch, yd or m²).
A diagram of distribution is created.
Available measuring system:
Nm/m, Nec/yd, Nec/m, Nec/yd (inch), den, dtex, Tex, KTex (gr/m), g/m², grains/yd, g, YSW.
Reference Standards
UNI EN ISO 2060, ISO 2060, ISO 3801, ISO 9073-1, ISO 3374, UNI EN 29073-1, UNI EN 12127, UNI 5114, UNI 8014-2/3/4, BS 2471, ASTM D1907, ASTM D2646, ASTM D3776
Electronic balances (to be selected from a wide range of models)
Optional
PC available on demand
Product sheets
Product sheets
Submit your data and you will be contacted by one of our experts
